Elevating Work Platform – WA

TLILIC0005 – License To Operate A Boom-Type Elevating Work Platform

Course Details

Under the Work Health and Safety Act 2020, a High Risk Work Licence is mandatory for operating a boom-type elevating work platform (boom length 11 metres or more) in Western Australia. Our face-to-face course delivers the nationally recognized unit TLILIC0005 – Licence To Operate A Boom-Type Elevating Work Platform.

What You'll Learn

  • Plan EWP operations
  • Conduct routine checks
  • Set up and operate EWP
  • Shut down and secure EWP
  • Implement emergency procedures

Upon completion, participants receive a Statement of Attainment and can apply for their High Risk Work Licence through WorkSafe WA.

Course Details

For Beginners:

  • Delivery: Face-to-face session at our training location
  • Duration: 2 Days
  • Cost: AUD $450.00 (GST Free)

For Experienced/Refresher:

  • Delivery: Face-to-face session at our training location
  • Duration: 1 Day
  • Cost: AUD $400.00 (GST Free)

Certification:

  • Statement of Attainment issued within 3–7 business days
  • High Risk Work Licence issued by WorkSafe WA upon successful application

Requirements

  • Must be 18 years or older
  • Proof of WA residency (e.g., WA driver's licence or utility bill)
  • Valid Photo ID
  • Unique Student Identifier (USI)
  • Conversational level of English for reading, responding, and interpreting safety information

Assessment Details

Verbal, Practical & Theory Assessments:

Language Requirements:

  • Assessments are conducted in English only, without translators.

Identity Verification:

  • Participants must verify their identity using valid Photo ID during the assessment process.

PPE Requirements

  • All PPE supplied except for Foot ware

Re-enrolment Policy

Participants must complete all components of the course within the allocated timeframe. Failure to do so will require re-enrollment and payment of associated fees.

Learning Outcomes

Upon successful completion of the course and assessments, you will receive a Statement of Attainment for the nationally recognized unit:

TLILIC0005 – Licence To Operate A Boom-Type Elevating Work Platform

You will gain the knowledge and skills to:

  • Assess workplace risks and implement control measures
  • Conduct pre-operational checks and maintenance
  • Operate EWP safely in various conditions
  • Position and stabilize EWP correctly
  • Apply emergency procedures when required
  • Shut down and secure EWP according to procedures

Train with All West Training to ensure you're equipped with the essential skills for safe and compliant EWP operation.

Eligibility

Location Requirement (WorkSafe WA):

In line with WorkSafe WA requirements, High Risk Work Licences can only be issued to participants who are physically located in Western Australia during the assessment. Proof of WA residency (e.g., WA driver's licence or utility bill) is required.

English Language Requirement

Participants must have a conversational level of English to:

  • Listen to instructions and respond clearly to questions during the assessment
  • Read and interpret safety signs and procedures
  • Write short, simple notes (e.g., completing basic forms)

PPE Requirement

All PPE supplied except for Foot ware

Ensure you meet these eligibility criteria to successfully enroll and complete the EWP Licence course with All West Training. Enroll today!

What's Included

At All West Training, we are committed to ensuring every participant successfully completes the EWP Licence course. Our Learner Support Service is available to provide additional assistance if needed to help you understand the course material or complete assessments.

Included Support

Should you have difficulties with your Language Literacy & Numeracy skills then please inform us. We can assist you.

Additional Support

Need Extra Help?

Contact our team to learn more about the support services available and how we can assist you in achieving your certification.

Train confidently with All West Training—supporting you every step of the way.

Additional Information

Who Needs an EWP Licence in WA?

Under the Work Health and Safety Act 2020 and Regulations 2022, a High Risk Work Licence is required for anyone operating a boom-type elevating work platform where the boom length is 11 metres or more in Western Australia.

For further clarification, consult your employer or visit WorkSafe WA.

Card Delivery Options

  • Regular Domestic Post: No charge
  • Express Domestic Post: $10 (incl. GST)

Get your EWP Licence with All West Training and start operating safely and legally.

FREQUENTLY ASKED QUESTIONS

Elevating Work Platform - WA

TLILIC0005 – License To Operate A Boom-Type Elevating Work Platform

Course Basics

What is an EWP Licence and why do I need it?
Under the Work Health and Safety Act 2020, a High Risk Work Licence is mandatory for operating a boom-type elevating work platform (boom length 11 metres or more) in Western Australia. This licence allows you to legally operate EWPs across Australia after completing the nationally recognized unit TLILIC0005.
How long does the course take and what does it cost?
We offer two course options:
  • Beginners: 2-day course - $450 (GST Free)
  • Experienced/Refresher: 1-day course - $400 (GST Free)
Both options include face-to-face training and all necessary materials. Your Statement of Attainment will be issued within 3-7 business days, after which you can apply for your High Risk Work Licence through WorkSafe WA.

Requirements

What are the entry requirements?
To enroll in this course, you must:
  • Be 18 years or older
  • Provide proof of WA residency (WA driver's licence or utility bill)
  • Have valid Photo ID
  • Have a Unique Student Identifier (USI)
  • Bring appropriate footwear (all other PPE is supplied)
Are there any language requirements?
Yes, you need a conversational level of English to:
  • Understand and respond to instructions
  • Read and interpret safety signs and procedures
  • Complete basic written tasks
Translators are not permitted during assessments.

Assessment & Certification

What does the assessment involve?
The assessment includes:
  • Theory assessment
  • Practical assessment including pre-operational checks
  • Hands-on operation of EWP equipment
  • Safety procedures and emergency response scenarios
All components must be completed within the allocated timeframe.
How do I receive my licence?
The process involves two steps:
  1. Receive your Statement of Attainment from us (3-7 business days after successful completion)
  2. Apply for your High Risk Work Licence through WorkSafe WA using your Statement of Attainment
Regular domestic post is free, or you can opt for express delivery for an additional $10 (incl. GST).

Terms and Conditions

Definitions:

  • Course Owner: Robbar PTY LTD trading as All West Training, who owns and delivers the training content and maintains intellectual property rights
  • Course certification: The documentation issued by All West Training on completion of training, including Statement of Attainment and High Risk Work Licence for EWP operations
  • High Risk Work Licence: The licence required to operate a boom-type elevating work platform (boom length 11 metres or more)
  • Service: The infrastructure and systems required to participate in the course

Introduction

Thank you for choosing All West Training for your Elevated Work Platform training needs. This document outlines the Terms and Conditions that apply to the EWP course (hereafter known as the "course") and your access to the infrastructure required to participate in the course (hereafter known as the "service").

Any legislation referred to in the Terms and Conditions of Use is Western Australian and Commonwealth legislation (as applicable).

Agreement to Terms and Conditions

Your access to the course and service is dependent on your acceptance of the Terms and Conditions outlined in this document. By accessing the course and service, you agree to these Terms and Conditions. If at any time you do not agree with these Terms and Conditions, you must immediately discontinue use of the course and service.

Amendments to Terms and Conditions

All West Training reserves the right to amend the course and service Terms and Conditions at any time.

Right to Release Information to Third Parties

Your information is handled in accordance with the Privacy Act 1988. All West Training reserves the right to disclose your information to:

  • The Australian Skills Quality Authority (ASQA) in fulfilment of RTO reporting requirements
  • NCVER
  • WorkSafe WA for High Risk Work Licence processing
  • State, Territory or Federal government regulatory bodies if the course is associated with state, territory or federal funding
  • Other third parties as required by Law
  • Other third parties in direct relation to legal action or debt collection

Content

All text, graphics, illustrations, animation, video, audio and software that make up the course and the service (hereafter collectively known as the "content") shall remain the property of All West Training.

You agree to not:

  • Copy, modify, redistribute or exploit the content in any way unless expressly permitted
  • Store the content in any format or by any method except temporary files required to access the course
  • Use the content contrary to its explicit and implicit purpose

Course Details

  • Duration for Beginners: 2 Days
  • Duration for Experienced/Refresher: 1 Day
  • Delivery: Face-to-face training
  • Assessment: Written, practical and verbal components
  • Certification: Statement of Attainment issued upon successful completion
  • Licensing: High Risk Work Licence issued by WorkSafe WA upon successful application

Period of Enrolment

  • Course must be completed within the specified duration
  • The enrolment period commences when you begin the course
  • Extensions may be considered for extenuating circumstances at All West Training's discretion

Certification Timeframes

  • Statement of Attainment issued within 3-7 business days of successful completion
  • High Risk Work Licence issued by WorkSafe WA upon successful application
  • All certification subject to successful completion and identity verification

USI Requirements

From 1 January 2015, All West Training cannot issue you with a nationally recognised VET qualification or statement of attainment without a Unique Student Identifier (USI). If you have not yet obtained a USI, you can apply at https://www.usi.gov.au/students/get-a-usi

Payment and Refunds

  • Course fees are non-refundable after payment
  • All West Training reserves the right to restrict future participation for students with outstanding payments
  • Additional fees may apply for High Risk Work Licence application to WorkSafe WA

Service and Course Availability

While All West Training uses reasonable efforts to ensure system and service availability, scheduled and unscheduled outages may occur. All West Training will not be held liable for such outages.

Data and Information Security

All West Training does not guarantee the security of data or information disclosed online. You accept the inherent security implications of online usage and will not hold All West Training liable for any breach of security.

Student Obligations

You must:

  • Protect any provided username and password from unauthorized use
  • Ensure all use of your account complies with these Terms and Conditions
  • Not plagiarize or copy any other person's assessment
  • Submit only your own work
  • Report any unauthorized access or system issues promptly
  • Meet all WorkSafe WA requirements for High Risk Work Licence application

Contact Information

For all course-related inquiries:
Email: [email protected]

Overseas Students who hold an Australian Student Visa

In accordance with the Education Services for Overseas Students (ESOS) Act 2000, All West Training is not registered as a CRICOS provider and cannot provide training to overseas students who hold an Australian Student Visa.

By agreeing to these Terms and Conditions, you confirm that:

  • You have read and understood all conditions
  • You will comply with all course requirements
  • You understand the certification requirements
  • You agree to provide accurate personal information
  • You understand and accept the no-refund policy
  • You understand the High Risk Work Licence requirements and application process

BOOK WITH ALL WEST TRAINING SERVICES

Elevating Work Platform - WA

TLILIC0005 – License To Operate A Boom-Type Elevating Work Platform


Allwest Training Service is a registered training organisation specialising in on-site training and verification of competencies. Bob Cooper has around 30 years experience in the construction, training and safety fields.

Get In Touch

Opening Hours:

Monday to Friday 8am-5pm

Phone Number:

0417991913

Address:

Busselton Trade Training Centre, Simon Street, Busselton, WA 6280

Contact us

I Consent to Receive SMS Notifications, Alerts & Occasional Marketing Communication from All West Training Services.

© 2025 Robbar PTY LTD.