First Attack Firefighting – WA
CPPFES2005 – Demonstrate first attack firefighting equipment
Course Details
Under the Work Health and Safety Act 2020, proper training is essential for workplace fire safety. Our face-to-face course delivers the nationally recognized unit CPPFES2005 – Demonstrate first attack firefighting equipment.
What You'll Learn
- Identify different classes of fire
- Select and operate fire extinguishers
- Use fire blankets
- Apply emergency procedures
- Implement post-incident procedures
Upon completion, participants receive a Statement of Attainment for first attack firefighting.
Course Details
- Delivery: Face-to-face session at our training location
- Duration: 5 Hours
- Cost: AUD $160.00 (GST Free)
Certification:
- Statement of Attainment issued within 3–7 business days
Requirements
- Valid Photo ID
- Unique Student Identifier (USI)
- Conversational level of English for reading, responding, and interpreting safety information
Assessment Details
Verbal, Practical & Theory Assessments:
Language Requirements:
- Assessments are conducted in English only, without translators.
Identity Verification:
- Participants must verify their identity using valid Photo ID during the assessment process.
PPE Requirements
- All PPE supplied except for Foot ware
Re-enrolment Policy
Participants must complete all components of the course within the allocated timeframe. Failure to do so will require re-enrollment and payment of associated fees.
Learning Outcomes
Upon successful completion of the course and assessments, you will receive a Statement of Attainment for the nationally recognized unit:
CPPFES2005 – Demonstrate first attack firefighting equipment
You will gain the knowledge and skills to:
- Identify different types of fires and appropriate extinguishing methods
- Select and operate appropriate firefighting equipment
- Use fire blankets effectively
- Implement emergency procedures
- Apply post-incident procedures
- Maintain workplace safety during fire emergencies
Train with All West Training to ensure you're equipped with the essential skills for workplace fire safety.
Eligibility
Location Requirement:
Training is conducted at approved All West Training locations in Western Australia.
English Language Requirement
Participants must have a conversational level of English to:
- Listen to instructions and respond clearly to questions during the assessment
- Read and interpret safety signs and procedures
- Write short, simple notes (e.g., completing basic forms)
PPE Requirement
All PPE supplied except for Foot ware
Ensure you meet these eligibility criteria to successfully enroll and complete the First Attack Firefighting course with All West Training. Enroll today!
What's Included
At All West Training, we are committed to ensuring every participant successfully completes the First Attack Firefighting course. Our Learner Support Service is available to provide additional assistance if needed to help you understand the course material or complete assessments.
Included Support
Should you have difficulties with your Language Literacy & Numeracy skills then please inform us. We can assist you.
Additional Support
Need Extra Help?
Contact our team to learn more about the support services available and how we can assist you in achieving your certification.
Train confidently with All West Training—supporting you every step of the way.
Additional Information
Who Needs First Attack Firefighting Training in WA?
Under the Work Health and Safety Act 2020 and Regulations 2022, proper fire safety training is recommended for workplace fire wardens and any staff members responsible for emergency response procedures.
For further clarification, consult your employer or visit WorkSafe WA.
Card Delivery Options
- Regular Domestic Post: No charge
- Express Domestic Post: $10 (incl. GST)
FREQUENTLY ASKED QUESTIONS
First Attack Firefighting – WA
CPPFES2005 – Demonstrate first attack firefighting equipment
Course Basics
- Duration: 5 hours
- Cost: $160 (GST Free)
Requirements
- Valid Photo ID
- Your Unique Student Identifier (USI)
- Appropriate footwear (all other PPE is supplied)
- Understand and respond to instructions
- Read and interpret safety signs and procedures
- Write short, simple notes (e.g., completing basic forms)
Assessment & Certification
- Theory assessment on fire classes and safety procedures
- Practical fire extinguisher operation
- Fire blanket use demonstration
- Emergency response scenarios
- Post-incident procedures
- A Statement of Attainment for CPPFES2005
Terms and Conditions
Definitions:
- Course Owner: Robbar PTY LTD trading as All West Training, who owns and delivers the training content and maintains intellectual property rights
- Course certification: The documentation issued by All West Training on completion of training, including Statement of Attainment for First Attack Firefighting
- First Attack Firefighting: The use of first attack firefighting equipment including fire extinguishers and fire blankets
- Service: The infrastructure and systems required to participate in the course
Introduction
Thank you for choosing All West Training for your First Attack Firefighting training needs. This document outlines the Terms and Conditions that apply to the First Attack Firefighting course (hereafter known as the "course") and your access to the infrastructure required to participate in the course (hereafter known as the "service").
Any legislation referred to in the Terms and Conditions of Use is Western Australian and Commonwealth legislation (as applicable).
Agreement to Terms and Conditions
Your access to the course and service is dependent on your acceptance of the Terms and Conditions outlined in this document. By accessing the course and service, you agree to these Terms and Conditions. If at any time you do not agree with these Terms and Conditions, you must immediately discontinue use of the course and service.
Amendments to Terms and Conditions
All West Training reserves the right to amend the course and service Terms and Conditions at any time.
Right to Release Information to Third Parties
Your information is handled in accordance with the Privacy Act 1988. All West Training reserves the right to disclose your information to:
- The Australian Skills Quality Authority (ASQA) in fulfilment of RTO reporting requirements
- NCVER
- State, Territory or Federal government regulatory bodies if the course is associated with state, territory or federal funding
- Other third parties as required by Law
- Other third parties in direct relation to legal action or debt collection
Content
All text, graphics, illustrations, animation, video, audio and software that make up the course and the service (hereafter collectively known as the "content") shall remain the property of All West Training.
You agree to not:
- Copy, modify, redistribute or exploit the content in any way unless expressly permitted
- Store the content in any format or by any method except temporary files required to access the course
- Use the content contrary to its explicit and implicit purpose
Course Details
- Duration: 5 Hours
- Delivery: Face-to-face training
- Assessment: Written, practical and verbal components
- Certification: Statement of Attainment issued upon successful completion
Course Requirements
- Physical capability to handle firefighting equipment
- Appropriate clothing and enclosed footwear
- English language proficiency for safety instruction comprehension
- Ability to participate in practical firefighting exercises
Safety Requirements
- Follow all safety instructions provided by trainers
- Wear appropriate Personal Protective Equipment (PPE) as directed
- Report any safety concerns immediately
- Participate in safety briefings and demonstrations
Period of Enrolment
- Course must be completed within the specified 5-hour duration
- The enrolment period commences when you begin the course
- Extensions may be considered for extenuating circumstances at All West Training's discretion
Certification Timeframes
- Statement of Attainment issued within 3-7 business days of successful completion
- All certification subject to successful completion and identity verification
USI Requirements
From 1 January 2015, All West Training cannot issue you with a nationally recognised VET qualification or statement of attainment without a Unique Student Identifier (USI). If you have not yet obtained a USI, you can apply at https://www.usi.gov.au/students/get-a-usi
Payment and Refunds
- Course fees are non-refundable after payment
- All West Training reserves the right to restrict future participation for students with outstanding payments
Service and Course Availability
While All West Training uses reasonable efforts to ensure system and service availability, scheduled and unscheduled outages may occur. All West Training will not be held liable for such outages.
Data and Information Security
All West Training does not guarantee the security of data or information disclosed online. You accept the inherent security implications of online usage and will not hold All West Training liable for any breach of security.
Student Obligations
You must:
- Follow all safety instructions and procedures
- Use firefighting equipment only as instructed
- Report any equipment issues or safety concerns immediately
- Submit only your own work for assessments
- Report any unauthorized access or system issues promptly
Contact Information
For all course-related inquiries:
Email: [email protected]
Overseas Students who hold an Australian Student Visa
In accordance with the Education Services for Overseas Students (ESOS) Act 2000, All West Training is not registered as a CRICOS provider and cannot provide training to overseas students who hold an Australian Student Visa.
By agreeing to these Terms and Conditions, you confirm that:
- You have read and understood all conditions
- You will comply with all course and safety requirements
- You understand the certification requirements
- You are physically capable of participating in practical firefighting exercises
- You agree to provide accurate personal information
- You understand and accept the no-refund policy
BOOK WITH ALL WEST TRAINING SERVICES
First Attack Firefighting – WA
CPPFES2005 – Demonstrate first attack firefighting equipment
Allwest Training Service is a registered training organisation specialising in on-site training and verification of competencies. Bob Cooper has around 30 years experience in the construction, training and safety fields.
Get In Touch
Email: [email protected]
Opening Hours:
Monday to Friday 8am-5pm
Phone Number:
0417991913
Address:
Busselton Trade Training Centre, Simon Street, Busselton, WA 6280
Contact us
I Consent to Receive SMS Notifications, Alerts & Occasional Marketing Communication from All West Training Services.
